Submasters

Not sure what you mean here Orri, could you give some examples?

When recording channel 931 as preset onto a submaster it shows CH 91 on the top row.

Regards,
Orri

Interesting: I just tried recording a Channel to a Master with the syntax "913 [CH] & [Master button] and it shows "Ch913", with no spaces at all. "91 [CH] & [Master Button]" shows the content labeled as "Ch91", still no spaces.

I'm still on version 6.04 here; did something change? 

in version 6.1 you only get two numbers when recording a channel directly onto a submaster which is not a good thing.  The third letter does show on the second line but not if the channel in question is a device.  Then the second line shows the device type.

Regards,
Orri

We will revisit this for a future version to see if we can come up with a better solution.

Personally, I'd rather be seeing the channel text than the number, if you have text assigned.  EDIT: Just realized now that I have 6.1 in the system, that that's included! Yay! I'm quite happy with that as a solution.

As a happy compromise, coud the space after Ch be omitted so that three letter channel numbers are displayed (I guess majority of the numbers used are 1, 2 or 3 letters).

I dump channels onto subs when programming and then delete them or record over them when I move onto another scene etc.  Labeling channels is not someting I spend alot of time on.

Regards,
Orri

As a happy compromise, coud the space after Ch be omitted so that three letter channel numbers are displayed (I guess majority of the numbers used are 1, 2 or 3 letters).

I dump channels onto subs when programming and then delete them or record over them when I move onto another scene etc.  Labeling channels is not someting I spend alot of time on.

Regards,
Orri