Multiple sequence with action macros

Hi,

Before jumping into specific solutions, could you give as example on what you wanted to achieve from the beginning?

Hello

We Wanted to start/control "sequence 2" containing a few presets from the main playback (sequence 1) .
And we Wanted to do this with à action  macro if it is possible.

/F

Hi,

This should be possible to do with Action Macros.

Load Sequence 2 to a master.

Use Action Macro commands like this to control it: GO M1,100,10.

This would fade the sequence in master 1 into preset 100 in 10 seconds. If you don't specify a time, it will use the programmed crossfade times. If you don't specify a preset, the sequence will make a GO to the next cue.

Does this solve your problem?

Anders 

Hi,

This should be possible to do with Action Macros.

Load Sequence 2 to a master.

Use Action Macro commands like this to control it: GO M1,100,10.

This would fade the sequence in master 1 into preset 100 in 10 seconds. If you don't specify a time, it will use the programmed crossfade times. If you don't specify a preset, the sequence will make a GO to the next cue.

Does this solve your problem?

Anders