Adding channels like groups

The CH & Master command works slightly different. You can select any number of channels using the normal selection commands and assign them in one go to consequtive masters by pressing CH & Master (for the first master you want to assign). Note that there should be no channel number entered before this command since this will only load the specified channel, not the selected channels.

Does that work for you?

The CH & Master command works slightly different. You can select any number of channels using the normal selection commands and assign them in one go to consequtive masters by pressing CH & Master (for the first master you want to assign). Note that there should be no channel number entered before this command since this will only load the specified channel, not the selected channels.

Does that work for you?

Ya that works just fine! Although I still think you should be able to assign channels like you can with groups. If you only need to add 5 channels for example. Its a lot faster adding them like you would with groups then having to select your channels on the live screen with your mouse or entering 1-THRU-5-CH/ID. Is there a reason for why it was done that way?

Thank you for your quick reply.

Jeremy

I understand what you mean.

The reason is that there would be an internal conflict with the two different commands assigned to the same key combination (load channel and load selection).