Synching Beams

Question

What is the process to synch the beams on stage with those in Augment3d? In the picture I've driven two ML's to hit the same spot (a bench center downstage) on the stage. Back in Augment3 the two beams miss each other.

starksk · Answer

Hi Robert452 , 
 Augment3d relies on accuracy of the data input into the model as well as the fixture profile data in order to calculate where the beams are in the 3D world as compared to reality. Not only must the locations of your fixtures be precise in your model, but Augment3d must have an exacting understanding of the fixture kinematics (the way the fixture moves) as well. 
 I see from your screenshot that your model of your fixture is quite off from what I would expect. If these fixtures are from a previous show file, I recommend that you update your fixture profiles as your first step. See https://support.etcconnect.com/ETC/Consoles/Augment3d/Eos_Fixture_Profiles_must_be_up-to-date_for_Augment3d_Functionality 
 From your previous posts, I see you have also been experimenting with building your own profile. If these fixtures are those profiles, please see the instructions for how to determine and correct Pan and Tilt ranges here: https://support.etcconnect.com/ETC/Consoles/Augment3d/Fixture_Physically_Pans_or_Tilts_in_the_Opposite_Direction_from_Visualized_Movement#Pan_Range 
 Additionally, you will wish to correct the Hang to Focus offsets in the model definition (this is why the fixture head appears outside of the yoke in the image) by adjusting the values to match the physical measurements of the fixtures. More info on this can be found here: https://support.etcconnect.com/ETC/Consoles/Augment3d/Hang_to_Focus_Offsets