SolaWash 2000 rendering

Well, as mentioned in the post. There is no fixture profile for the SolaWash 2000 in A3d.

Have I overlooked something?

I installed <EOS Family Console Fixture Library 3.0.0.118, 21.Oct.2020> yesterday and could not find it there.

But when I opened a NEW blank play (no patch) it appeared on the list.

So, as all my SolaWash 2000 are patched with the custom fixture profile *DNO I could delete the  profile  in the current show.

After that it was possible to patch a fixture with the d3 profile from the library. (and it looks ok so far)

3001 new 3002 old fixture profile

Thank you for your replys 

Ulf

I installed <EOS Family Console Fixture Library 3.0.0.118, 21.Oct.2020> yesterday and could not find it there.

But when I opened a NEW blank play (no patch) it appeared on the list.

So, as all my SolaWash 2000 are patched with the custom fixture profile *DNO I could delete the  profile  in the current show.

After that it was possible to patch a fixture with the d3 profile from the library. (and it looks ok so far)

3001 new 3002 old fixture profile

Thank you for your replys 

Ulf

uhm, it's there...

The whole thing is a bit confusing for me.
As it seems: Opening a show file from previous 2.9.1 it is not working in the model.
The fixture profile that comes up with search is not working either. Se channel 3002
Deleting the profile and reloaded from the search field gives the correct profile, even so the name stays the same. Se channel 3001.

3001 representing the new / 3002 the old fixture profile

can i ask, did you actually read the link i posted? it's explained there why it happens and what to do...

Yes, briefly :-) And the warning at the end.

Anyway, thank you for your time and response.  At least I have a plan now, how to proceed without messing up existing shows.