• State Verified Answer
  • +1 person also asked this people also asked this
  • Date
    MTonery
  • Date
  • Replies 7 replies
  • Subscribers 38 subscribers
  • Views 3365 views
  • Users 0 members are here

Color Force ll, 72 - A3D Profile

Currently, the Color Force ll 72 Fixtures are using the generic par model inside A3D. The Color Force Series l looks fine as a generic strip light unit inside A3D, just not the series ll. Any way to change that?

Version: 3.0.01 Build 31

Fixture Library Version: 3.0.1.2

Parents
  • 0

    Any update to this? Currently running into same issue on 3.1.3.8 

  • 0 in reply to eljacko129

    as long as it's about the size and shape of the fixture rather than an accurate lens representation you can assign the model of an ETC ColorSource Linear which is a striplight. regarding size a Linear 2 is probably closest.

Reply
  • 0 in reply to eljacko129

    as long as it's about the size and shape of the fixture rather than an accurate lens representation you can assign the model of an ETC ColorSource Linear which is a striplight. regarding size a Linear 2 is probably closest.

Children
  • 0 in reply to ueliriegg

    Unfortunately it is for a variety of gradients that are programmed in 24 cell mode. Currently trying out the Vivid strip in A3D and seeing if that works. 

www.etcconnect.com