Is it possible to get channel or address value from any cue by OSC?
Is it possible to get channel or address value from any cue by OSC?
No - it's only possible to get the current value.
However you can iterate through cues in blind, and get values that way. Just know that this method can be time consuming.
If you are able to, I'd recommend using one of the export file methods instead. File>Export>CSV, for example will include the information you're looking for.
Sorry again. How can i get value (intesity and color) from blind if I interate cue and chanel?
by listening to the OSC output of the console.
upon selecting a channel it will send:
/eos/out/active/chan, 2 (and some more details about the type)
/eos/out/active/wheel/1, Intens ...
/eos/out/active/wheel/2, Red ...
/eos/out/active/wheel/3, Green ...
/eos/out/active/wheel/4, Blue ...
/eos/out/active/wheel/5, Hue ...
/eos/out/active/wheel/6, Saturation ...
/eos/out/color/hs, ...
Thank you, but this always back me only data from actual live cue, not from blind interate cue.
ah, sorry. didn't read carefully
ah, sorry. didn't read carefully
i just tried it and i get the blind values...
This is weird. I have same value from live cue (from every blind cue). What I am doing wrong?
/eos/key/blind
/eos/cue/1/<cue>
/eos/chan/<chan>
ah, i think i found my confusion. i have been looking at /eos/out/color/hs, and this seems to change from blind cue to cue, but the wheel parameters don't...
sorry for the confusion.
www.etcconnect.com