streamdeck plus

I am getting $NA on all of the encoders wheels. Do you have any suggestions on settings that I might have wrong? The other buttons seem to work. Cues etc but the encoders don’t. Any thoughts would be hugely appreciated. 

Try the latest v3 beta. https://user.bitfocus.io/download 3.0.0+5998 is the most recent as I write this.

Then try the sample StreamDeck+ config that is part of the GitHub repository:  https://github.com/bitfocus/companion-module-etc-eos/blob/master/sample_config_streamdeckplus.companionconfig

Thank you, I updated to the beta and the $NA wet away but the wheel buttons still don't work. 

Maybe it’s because it is a eos v2.9.3. Build 12. Possibly not working because I am not in slip mode I will try that next.  I also notice I am unable to point to the same computer. Only to the console on the network 

Enabling slip makes the entire system not able to connect at all 

SLIP works only on Port 3037 which is new for EOS v3.x, without SLIP the standard port 3032. See also the documentation for module version 2.0.7

if i remember correctly, port 3037 is supposed to always be SLIP, 3032 can either be 1.0 or 1.1 depending on the setup setting.

didn't test it though.

ueliriegg You are right. For third party application Port 3037 and SLIP should used (started with EOS v3.x)

Hello,wasn't aware of steamdeck plus, seems great.

On it, can we get one button per parameter and the encoders matching? (e.g. i push shutter button, the 4 encoders become angle A ->thrust C and so on)

If so, is there some controler feeting eos with 8 rotative encoders, to get TI style?

Yes, this is the way the sample configuration file works, but of course you can modify that any way you would like. For a larger surface you would need to find one supported by Companion which I don't know of offhand. Otherwise there are standalone units to work with EOS that have more encoders like the JOSC [at]/2 encoder module kit sold on Etsy. I have no experience with them.

Yes, this is the way the sample configuration file works, but of course you can modify that any way you would like. For a larger surface you would need to find one supported by Companion which I don't know of offhand. Otherwise there are standalone units to work with EOS that have more encoders like the JOSC [at]/2 encoder module kit sold on Etsy. I have no experience with them.