Dropped OSC commands

A few places to look -- first check Tab 99 and ensure that OSC logging is enabled. Also you can export your logs (Browser>Logs) then open the zip folder, and then OnyxConsole.txt document, and see if it shows the OSC string being sent in there. That should help confirm if the console is sending or trying to send the OSC command. If it's not in there, then double check that it's properly being triggered in EOS.

A few places to look -- first check Tab 99 and ensure that OSC logging is enabled. Also you can export your logs (Browser>Logs) then open the zip folder, and then OnyxConsole.txt document, and see if it shows the OSC string being sent in there. That should help confirm if the console is sending or trying to send the OSC command. If it's not in there, then double check that it's properly being triggered in EOS.

Thanks! I´ll have a look at that. Thing is, that it is random cues that don't fire, so it feels like some packets are just lost on the way. Using UDP by the way, I was wrong about TCP...

Now that we know it's UDP your problem can be explained.

How much traffic is there on the network you're using to send OSC? Do you send sacnyor ArtNet on this network as well? What's the network topology like? What switches do you use?

ueliriegg said:

that we know it's UDP your problem can be explaine

Yes, there is also sACN on the same network. It's a Luminex based network with approx 15 switches. Data amount is a couple of universes, nothing really big.