Receiving Osc to Channel

Question

Hello, 
 
 I m locking to connect osc informations to a channel. 
 For example I send the information &ldquo;out&rdquo; from a computer and I send this information to an Eos. 
 In Eos I see the osc command in tab 99 and I would to link this information to a channel. 
 Is it possible ?

sktusing · Answer

You shouldn't be using wheels. Instead, you should use: /eos/user/99/chan//param//override= This is more efficient for Eos than using the wheel command - it will also send the data as override data as opposed to manual values. You can configure the OSC address in Kratos. Are you sending via ADM-OSC, or via OSC? You need to send via OSC as ADM-OSC is specific a way of sending data via OSC. As eos moderator has said, it looks like the OSC is malformed in some manner.

eos moderator · Answer

You can send a regular command line to Eos to turn off a channel: 
 /eos/cmd/chan/1/out/enter 
 If you send it to the console's user ID this will show up in the console's command line, if you send it to a different ID you can send these commands in the background.

eos moderator · Answer

Either the data coming in is already linked to the channel through the information in the OSC you're receiving, or you're sending the values to a console (technically to a user ID) that already has a channel selected. 
 The former would be preferred, it will probably process quite a bit faster since it doesn't have to go through the command line.

eos moderator · Answer

This still needs a selection by the user ID you're sending to. 
 You might want to look into a software like OSCRouter to reformat the incoming OSC string (e.g. add the channel number) before the console receives it.

Receiving Osc to Channel

Top Replies