I am working on an applicaiton to talk to EOS using OSC
I have setup a TCP connection, and enabled OSC TX and I am seeing messages go back and forth.
I have a question re what is returned when a channel is selected, and how to know what my wheel values are.
Example.
/eos/user/11/cmd,, 41#(s) ( IE select channel 41 as user 11)
I see some standard replies such as
/eos/out/user/11/cmd , LIVE: Cue 1 : Chan 41 # (S) 0 (I)
/eos/out/cmd , LIVE: Cue 1 : Chan 41 # (S) 0 (I)
/eos/out/active/chan , 41 [0] F-LED Test_Use_Only _4_3_L_Direct @ 773 (S)
Then I get the current wheel info for that user / channel
/eos/out/active/wheel/2 , Red [100] (S) 3 (I) 100 (F)
/eos/out/active/wheel/3 , Amber [100] (S) 3 (I) 100 (F)
And many more in some cases.
After the wheel info I see:
/eos/out/color/hs , 49.118282 (F) 40.685978 (F)
/eos/out/pantilt
/eos/out/xyz
Lets me know I have all the wheel info ( IE I see something other than an active/wheel message)
if the user# already knows what wheels/values are in use, - the output looks something like this.
/eos/user/13/cmd , 5# (S)
/eos/out/user/13/cmd , LIVE: Cue 1 : Chan 5 # (S) 0 (I)
/eos/out/cmd , LIVE: Cue 1 : Chan 5 # (S) 0 (I)
/eos/out/active/chan , 5 [0] C1 Generic Dimmer @ 15 (S)
And nothing else.
The Question - How can I tell that eos has given me all of the wheel information?
The question - how do I know that there are no additional wheels for this fixture? I could of course set a timeout but that seems inelegant.
