Cue increment.

Hi Jelle,

You can increment by pressing [Next] several times, so if you're in Cue 1 [Record] [Cue] [Next] [Next] [Enter] will set the next cue to be recorded to 3.

I'm afraid there isn't another way to set that cue increment at the moment.

Cheers

Dan

Hi Dan,

thanks for your reply.

Yes, this I understand. I use this now, but it is a lot of work if you want to increase by 10. I program for several designers that like to increase by 5 or 10 in a primal stage. That way, they have enough cue space left for more cues, without using a lot of point cues. (1.5, 2.579, 10.15 etc. etc.) So it would be very usefull if this was a setting in the Show Settings.

Maybe something for the next software update?

I would like this feature very, very much!

Kind regards, Jelle.

Hi Dan,

thanks for your reply.

Yes, this I understand. I use this now, but it is a lot of work if you want to increase by 10. I program for several designers that like to increase by 5 or 10 in a primal stage. That way, they have enough cue space left for more cues, without using a lot of point cues. (1.5, 2.579, 10.15 etc. etc.) So it would be very usefull if this was a setting in the Show Settings.

Maybe something for the next software update?

I would like this feature very, very much!

Kind regards, Jelle.

You could also learn a macro that presses [Next] ten times, and press that instead of next after record.

Hi Dan,

thank you, that is a good solution for now. I'll use this, and I hope that it's possible to implement this feature in a future release.

Kind regards, Jelle.