Live table not zooming

Try holding down the format key and using the scroller wheel on the console itself rather than the mouse.

I used to be able to use the mouse to zoom but after updating to the latest firmware, I found myself unable to.

WV-Theatre

Still won't zoom on tombstone only view

do you happen to have 100 channel Display enabled?

Setup/Desk/Displays

100 Channel Display is enabled.  I tried disable- still same problem.

You cannot zoom with 100-channel view enabled, because then it would not be displaying 100 channels.

Please disable it and try again, using [Format] & Level Wheel and ensuring that the Live tab is 'focussed' with the gold outline.

On our one console, havent been to the other three to test, the tombstone view with fixture parameters will zoom  with either 100 channel view enable or disabled, but with tombstone only view (only showing intensities for patched channels) it will not zoom with 100 channel view enabled or disabled.  I have tried it with both the mouse and [Format] and level wheel.

On our one console, havent been to the other three to test, the tombstone view with fixture parameters will zoom  with either 100 channel view enable or disabled, but with tombstone only view (only showing intensities for patched channels) it will not zoom with 100 channel view enabled or disabled.  I have tried it with both the mouse and [Format] and level wheel.

I have the same issue with my theaters 3 ions All running the current 1.9.12. 

Maybe a bug?

Stopped by ETC Booth at LDI- they suggested a deep clear.  Well.... deep clear worked.  As long as you aren't in 100 channel enable, tombstones zoom.