• State Not Answered
  • Date
    jsnmllr1981
  • Date
  • Replies 1 reply
  • Subscribers 184 subscribers
  • Views 2329 views
  • Users 0 members are here

Pixel Mapping with 3 Section LED Bar

Hi, we just got 10 LED bars that have 3 RGB sections on them.  I can not get the pixel mapping to use all three sections separately.  These are the lights:   http://store.bargeheights.com/products/bar-252/

When I create the grid I am putting in each section, then when I assign the channels I have to select 3 fixtures to add the Bar.

Is there a trick I am missing?

Parents
  • 0

    the fixtrue looks like the michro led bar that i have, same type 3 segment fixtrue. 

     

    what i do is patch each segment as a single led fixture in the patch and pixel map. so for me it would look something like this. 

    Fixture DMX is as follows . 13 channel fixture.

    1- macro

    2-all red

    3-all green

    4-all blue

    5-segment 1 red

    6-segment 1 green

    7-segment 1 blue

    8-segment 2 red

    9-segment 2 green

    10-segment 2 blue

    11-segment 3 red

    12-segment 3 green

    13-segment 3 blue

     

    so i would us a generic led RGB profile and start patching at channel 5 for each fixture. and skip the first 4 channels in each fixtrue as you can do the same functions of those channels using groups. 

     

     



    [edited by: jfodor at 11:41 AM (GMT -6) on Fri, Nov 30 2012]
Reply
  • 0

    the fixtrue looks like the michro led bar that i have, same type 3 segment fixtrue. 

     

    what i do is patch each segment as a single led fixture in the patch and pixel map. so for me it would look something like this. 

    Fixture DMX is as follows . 13 channel fixture.

    1- macro

    2-all red

    3-all green

    4-all blue

    5-segment 1 red

    6-segment 1 green

    7-segment 1 blue

    8-segment 2 red

    9-segment 2 green

    10-segment 2 blue

    11-segment 3 red

    12-segment 3 green

    13-segment 3 blue

     

    so i would us a generic led RGB profile and start patching at channel 5 for each fixture. and skip the first 4 channels in each fixtrue as you can do the same functions of those channels using groups. 

     

     



    [edited by: jfodor at 11:41 AM (GMT -6) on Fri, Nov 30 2012]
Children
No Data
Related

www.etcconnect.com