Robe Robin 600 LEDWash with 3 seperate LED-rings

Hello all,

I use several Robe Robin 600 LEDWashes in MODE 1 on my Ion (software 1.9.12).

I want to use the Robe Robin 600 LEDWashes with three seperate LED-rings.

The standard ETC Fixture for the Robe Robin 600 LEDWash M1 (three seperate LED-rings) drives al LED-ringswith RGBW.

So I copied this standard ETC Fixture en edit it to Red - Green - Blue - White - Red 2 - Green 2 - Blue 2 - White 2 - Red 3 - Green 3 - Blue 3 - White 3.

Now I can control all colors per LED-ring.

But the colors on the encoders end the ML Controls Display are Red - Green - Blue - Red 2 - Green 2 - Blue 2 - Red 3 - White - White 2 - White 3 - Hue - Saturation - Color Mix - Color Temperature - Green 3 - blue 3.

And there is only one Hue, Saturation en one Color Picker only for LED-ring 1.

- How can I get de colors in the right order?

- How can I get Hue and Saturation per LED-ring?

- How can I get a Color Picker per LED-ring?

Thanks and greeting,

Nico Vellinga

Nivell Theatertechniek

0 ueliriegg over 12 years ago

i'm pretty sure, you can only have one set of hue+sat and because of that only one color picker per channel with the current software. you would have to create seperate fixtures for the rings, maybe a channel controlling pan, tilt, beam, etc. and ring 1, then a channel for ring 2 and a channel for ring 3...

ueli
Cancel
Vote Up 0 Vote Down

Sign in to reply

Verify Answer

Cancel
0 nivell over 12 years ago in reply to ueliriegg

Hoi Ueli,

Thanks, that's a good suggestion.

But I hope ETC will make a better fixture creator for this kind of moving haeds.

Hi people from ETC: Is there a suggestion or future option for this?

Thanks again en greetings.

Nico Vellinga

Nivell Theatertechniek
Cancel
Vote Up 0 Vote Down

Sign in to reply

Verify Answer

Cancel