Non dimm / always on

You would need to create a custom curve to do this in patch. Most people would park the channel at full and forget about it.

Thank you guys. The park seems to work. is there any known drawbacks to using the park feature to power movers or led fixtures?

Powering MLs and LEDs through any dimmer is strongly discouraged. The power supply and electronics can be damaged.

Before powering any ML through a dimmer check with the manufacturer that the unit will tolerate it. If you are renting these fixtures confirm with the rental house that it is acceptable before doing it or it could lead to a very expensive repair bill.

Powering MLs and LEDs through any dimmer is strongly discouraged. The power supply and electronics can be damaged.

Before powering any ML through a dimmer check with the manufacturer that the unit will tolerate it. If you are renting these fixtures confirm with the rental house that it is acceptable before doing it or it could lead to a very expensive repair bill.

Hi,

you can change the Typ from your "non dim"-channel in the Patch...

Patch > Devices > Generic > Non Dim at Full