• State Not Answered
  • Date
    JackLynch
  • Date
  • Replies 6 replies
  • Subscribers 186 subscribers
  • Views 6952 views
  • Users 0 members are here

How to create a custom fixture for an RGB Cyc?

Thank you for taking the time to help me.

 

Basically I have a RGB cyc setup to mix with, but not LED.  I want to be able to use the built in color picker wheel to design with my cyc.

 

Is it possible, and how, to create a fixture that would allow me to have intensities for 3 colors and also be able to define what those colors are (roscolux gels) to make the color picker accurate?

Parents
  • 0

    We did this before and it is easy but you must have your individual fixtures addressed in succession.  E.G  Fixture 1 in dimmers 1,2,3 Fixture 2 in  13,14,15. etc. In other words there can be no gap in the dimmers (address) for in each individual fixture.  Once you have that figured out, when you patch just make the type Generic LED.  If you can get the Cyc lights into successive dimmers then you can range patch them as well to make it even easier.  

Reply
  • 0

    We did this before and it is easy but you must have your individual fixtures addressed in succession.  E.G  Fixture 1 in dimmers 1,2,3 Fixture 2 in  13,14,15. etc. In other words there can be no gap in the dimmers (address) for in each individual fixture.  Once you have that figured out, when you patch just make the type Generic LED.  If you can get the Cyc lights into successive dimmers then you can range patch them as well to make it even easier.  

Children
Related

www.etcconnect.com