Magic Sheets Display

Hi Craig,

I built my first magic sheet on the Ion this afternoon.  When I closed then re-opened it there was nothing on the screen. I checked the magic sheet browser, clicked on the sheet and still nothing.  I then happened to zoom out, and there it was!  It seems there is great scope in the zoom , so you might want to try this.

Cheers,

Glenn Cooper

Hi Craig,

I built my first magic sheet on the Ion this afternoon.  When I closed then re-opened it there was nothing on the screen. I checked the magic sheet browser, clicked on the sheet and still nothing.  I then happened to zoom out, and there it was!  It seems there is great scope in the zoom , so you might want to try this.

Cheers,

Glenn Cooper

I am able to view it on the external monitor, I am wondering if it is possible to have it on the internal touch screen on the EOS

it is possible. when you say you can't move it back, do you mean you can't move the tab back (hold Tab key and use arrows left/right) or that if you do, you can't see it when it's back on an internal one?

if you want to move it back, you will have to make sure that there is space on your internal monitors that can accept tabs. if you opened three sets of direct selects or other virtual controls, you would have to first close at least one of them: Displays > Browser > Virtual Controls > Close Module

ueli