Client Mode not reading Magic Sheets?

It's not a known issue. Maybe your zoom level is strange? Try doing a zoom to all on the magic sheet.

Unfortunately that's the first thing I tried.

I have 3 magic sheets and I tried it on all. When I went to the magic sheet browser (which in client mode you have to do in the browser) it showed me the 3 i had, but when I selected any of them the screen just went blank (not the whole screen, just the part that is supposed to display the magic sheet.) All the other tabs operated normally.

I've not seen any problems with this on Windows clients.

If you open the Magic Sheet browser by first opening the menu from the little arrow bottom left do you see little previews of each Magic Sheet? What about if you specifically select a magic sheet using the command line, say {Magic Sheet} 1 [Part] 1 [Enter] (Part posts as View to the cmd line).

Cheers

Dan

Hey Dan, yes I see the previews. When I click on them, nothing. Also yes I've typed in the command line and gotten nothing as well. I'm gonna go try and restart the Board and see if that helps... report back in a bit.

All, the problem fixed itself when I restarted the board. I feel silly for even putting a post up now, but I guess that just re-enforces the fact that you should always restart first when experiencing unexpected behavior....

Thanks all!