Manual Time/Rate Fader Suggestion

i'd like to have this feature too, but just to make sure: you're aware, that you can use sneak with direct selects?

Yes I know you can do that, but it takes a little more time (more buttons to press) and if you forget to hit sneak that one time, ouch.

Tis on the list.

thanks much!

a

My mover Magic Sheet page has 5 buttons set as Sneak 2, Sneak 4, Sneak 6, etc... As one button pushes.

So "All Fix (a Group button), Sneak 4 (button), Band (focus palette button), does that, mostly.

Thanks Anne

Yes, that is what I may have to do for now.  The fader is really handy as you never have to remember to push sneak.  It is just the way I have run for 10 years with an MA, so now have to program myself for something new.

You can also create a series of macros that change the manual time configuration in the desk.    I have a Time 0, 1, 3, and 5 configuration.  While still a button click - the benefit is it puts the desk in a permanent state - rather than needing to hit a sneak macro every time.

It'll need to be run in foreground mode. But the macro below runs pretty quickly.

Open_setup *

IntensityUp 3 *

IntensityDown 3 *

Focus 3 *

Color 3 *

Beam 3 *

Live

~Patrick

That is a very good tip.  Thank You.