can't control colour changers on 4 sub masters ION

The problem is probably that each sub contains all of the data for C, M, and Y.

In Blind Sub for the Cyan sub, select the channel(s), then put [-]{Cyan}[At][Enter] to remove all of the other data. Do the same for Magenta, Yellow.

Or, if you want to re-record in Live, first delete the subs, then use [Chan]{Cyan}[Record][Sub][x][Enter].

Hope that helps-

Luke

The problem is probably that each sub contains all of the data for C, M, and Y.

In Blind Sub for the Cyan sub, select the channel(s), then put [-]{Cyan}[At][Enter] to remove all of the other data. Do the same for Magenta, Yellow.

Or, if you want to re-record in Live, first delete the subs, then use [Chan]{Cyan}[Record][Sub][x][Enter].

Hope that helps-

Luke

Hi Luke

Infact, the problem is like that each sub contains all of the data....

I tried to do like you say but don't work...

If I re-record using  [Chan]{Cyan}[Record][Sub][x][Enter]. when i lift the sub nothing append.

Thanks

Hi Luke

Now it work!!

The correct string to make the sub is:[Chan]{Cyan@full}[Enter][Record][Sub][x][Enter]

Many thanks

Leo