ION Midi Show Control

So I am looking for information on setting up an ION to send MSC commands from the console to a device. I am sure that it is possible, but the manual seems to focus more on Time Code control. I am just looking to trigger SFX or Q-Lab from the ION via MIDI, and in the Show Control record target screen all I see in information regarding time code.

Parents

Dan Duffy over 17 years ago

The MIDI settings are in the Show Control settings in setup. Press [Displays] [Setup] [Show] [Show Control]. From there, press [MSC Transmit] to enable it, and set the MSC Transmit ID.
Cancel
Vote Up 0 Vote Down

Sign in to reply

Cancel
usesafesets over 17 years ago in reply to Dan Duffy

Right I got that. I am not sure, based on the manual, how to tell the desk to send a MIDI command on the execution of a cue. All I wan to to is when cue one GOs I want to send a MIDI GO to a Q-Lab system.
Cancel
Vote Up 0 Vote Down

Sign in to reply

Cancel
Eagle Eye over 16 years ago in reply to usesafesets

Has anyone gotten this to work?

Is there anymore information on this?
Cancel
Vote Up 0 Vote Down

Sign in to reply

Cancel
dvarian over 16 years ago in reply to Eagle Eye

What version of software are you using?

There was a bug in 1.4.3 that prevented MSC from working on Ion. This bug is fixed in 1.4.4.

DV
Cancel
Vote Up 0 Vote Down

Sign in to reply

Cancel
Eagle Eye over 16 years ago in reply to dvarian

I'm using 1.4.4 I'm just not clear on two things:

How do I tell event one to fire when I go on Cue 1/9?

How do I tell event one to send an MSC signal that will fire cue 2 on SFX?
Cancel
Vote Up 0 Vote Down

Sign in to reply

Cancel
jabadger over 16 years ago in reply to Eagle Eye

Right now you cannot customize the MSC string that is sent - e.g. If you have MSC Transmit enabled, the console will only "repeat" what you are go-ing on, on the console.
So if you push Go on Cue 3/34 then a MSC string of Go Cue 34, Cuelist 3 - will be sent.
Cancel
Vote Up 0 Vote Down

Sign in to reply

Cancel
Eagle Eye over 16 years ago in reply to jabadger

So if I assign Event 1 to Cue 90 will it automatically trigger when I go on Cue 90 or do I need to tell it to execute or learn or something like that?
Cancel
Vote Up 0 Vote Down

Sign in to reply

Cancel

Reply

Eagle Eye over 16 years ago in reply to jabadger

So if I assign Event 1 to Cue 90 will it automatically trigger when I go on Cue 90 or do I need to tell it to execute or learn or something like that?
Cancel
Vote Up 0 Vote Down

Sign in to reply

Cancel

Children

jabadger over 16 years ago in reply to Eagle Eye

The only thing that will trigger an Event in the Show Control Display - are the following; SMPTE Timecode (LTC), MIDI Timecode (MTC), an Analog trigger or a Time of Day/Real Time Clock Trigger (RTC). Not a go push off of a cuelist.
It sounds like you're trying to execute a cue on SFX or something based off of a go push from Eos/Ion. If you cannot set SFX to execute the same cues on the same cuelist as the console for whatever reason then I would suggest setting SFX to listen to a different cuelist (if you can even set that, I don't know) and then create those cues as empty cues in the console in that cuelist. Then when you want to trigger - say, Cue 2 on the SFX cuelist - in your lighting cuelist perform an Execute x/2 where X is the number of the cuelist with the blank cues in it that you assigned for SFX use. Yeah?
Cancel
Vote Up 0 Vote Down

Sign in to reply

Cancel
Eagle Eye over 16 years ago in reply to jabadger

Ok.... So if I just want to transmit MSC then enabling it in the setup is all it takes? I thought it would require the show control display so that was my hang up. Thanks. I'll have to see if I can make the whole thing happen now.
Cancel
Vote Up 0 Vote Down

Sign in to reply

Cancel