• Date
    zachpeletz
  • Date
  • Replies 2 replies
  • Subscribers 184 subscribers
  • Views 2895 views
  • Users 0 members are here

Running Multiple Cue Lists

I'm looking for the cleanest way to deal with the following:

I have one primary cue list that contains all fixtures and parameters. During a specific part of the show I need to trigger a secondary cue list which runs an effect on the pan and tilt of a few fixtures. Once this part of the show is complete I need to cleanly release the secondary cue list and return control back to the primary list.

Right now I'm asserting my primary list and then releasing the secondary one in a quick auto follow. If I don't do this with follows it seems that sometimes the list releases (sending p/t to 0/0) and then my main list reasserts. Obviously this is no good.

1. Is there a way to release the secondary list and have it automatically go to the values contained in the primary list?

2. Would it be wiser to use a submaster for any reason?

Thanks.



[edited by: zachpeletz at 8:12 PM (GMT -6) on Thu, Sep 12 2013]
Parents

  • Hey Zach.    Have you tried using the Off function?  So in your main cue list, if you use the execute field to trigger the secondary cue (i.e. Cue x Execute 2/1) and then write a macro to turn off the secondary list (Learn Macro x Enter   Off + Load Learn) and then put that macro in the execute field of your main cue list when you want to turn the effect off?

    a

     

Reply

  • Hey Zach.    Have you tried using the Off function?  So in your main cue list, if you use the execute field to trigger the secondary cue (i.e. Cue x Execute 2/1) and then write a macro to turn off the secondary list (Learn Macro x Enter   Off + Load Learn) and then put that macro in the execute field of your main cue list when you want to turn the effect off?

    a

     

Children
Related

www.etcconnect.com