Is there a quick way to allocate all 40 faders on my wing to channels 1 thru 40, and in such a way that activation of the fader will not affect any fixture parameters.
Is there a quick way to allocate all 40 faders on my wing to channels 1 thru 40, and in such a way that activation of the fader will not affect any fixture parameters.
Yes - Just press and hold [Fader Control] (above the main fader pair) until the wing screen shows the page selection screen. Fader 40 is a channel/submaster toggle.
J
Yep- that did it. Thanks for that.
Just as an FYI in case you need it - subsequent selections of pages will jump you through groups of channels in groups of 10, just as they would the subs. So selecting page five should give you channels 41-80, if memory serves.
J
Now that I've done this, is it possible to switch individual faders back to sub mode? Faders 36-40 for example.
No, don't think so
In this case you should rather program submasters with the intensity of single channels so they behave (almost) like channel faders...
We have a 2x20 Fader Wing, which no one ever set up when the theater was built. I would love to assign individual channels to each fader/slider, but many channels in our space are unused. I cannot seem to find directions to assign individual channels to sliders.
www.etcconnect.com