Show Cue System

Sending MIDI show control from Ion to Show Cue System on PC to run sound cues.  Strings that MIDI show control (also sending MIDI raw by macro) sends are not being received by SCS correctly and not being interpreted as a show control inside SCS.  Anyone have experience with this program?

Thanks,

Tom



[edited by: TomS at 5:10 PM (GMT -6) on Thu, Oct 10 2013]
Parents
  • I use Show Cue (currently using V 11.2.3) all the time triggering audio cues from my ION (2.0.1 BETA 37) via MIDI show control to a Behringer BCF2000 to a PC via USB.

    My set up is as follows:

    In ION Show control settings

    MSC transmit = enabled

    MSC transmit channel = 1

    ACN MIDI transmit ID = 1

    In Show Cue/Editor/Production/Properties/Devices/Cue Control Devices

    C1 Device Type = MIDI In

    Physical Device = BDF2000

    Active = Checked

    Setting in Device:

    MIDI in Port = BCF2000

    Control Method = MIDI Show Control (MSC)

    Device ID = 1 01H

    MSC Command Format = 01H Lighting (General)

    Go Button Macro # = 1 01H

    This set-up works for me every time.

    John

     

     

Reply
  • I use Show Cue (currently using V 11.2.3) all the time triggering audio cues from my ION (2.0.1 BETA 37) via MIDI show control to a Behringer BCF2000 to a PC via USB.

    My set up is as follows:

    In ION Show control settings

    MSC transmit = enabled

    MSC transmit channel = 1

    ACN MIDI transmit ID = 1

    In Show Cue/Editor/Production/Properties/Devices/Cue Control Devices

    C1 Device Type = MIDI In

    Physical Device = BDF2000

    Active = Checked

    Setting in Device:

    MIDI in Port = BCF2000

    Control Method = MIDI Show Control (MSC)

    Device ID = 1 01H

    MSC Command Format = 01H Lighting (General)

    Go Button Macro # = 1 01H

    This set-up works for me every time.

    John

     

     

Children
Related