• Date
    BSmith
  • Date
  • Replies 2 replies
  • Subscribers 182 subscribers
  • Views 3554 views
  • Users 0 members are here

Did I find a New Glitch

So we're in a final ballet dress.  Q420.5 is a zero count blackout.  During Q426, the Stage Manager asks if I can move Q420.5 to Q421 for ease of calling.  I do that successfully.  We finish the Run-thru with no apparent problems.  During notes, the LD asks to go to a cue later in the 400's.  It is drastically incorrect and different from what we had just seen.  As well, it turns out, as all the other cues in the piece. Upon several long minutes of searching we discover that the aberrant levels had all been tracked from Q420.  It seems that in the millisecond that Q420.5 was in the ether while moving to Q421, Q420 decided that was its time to take off as far as it could.  This was odd, but particularly so since we were in CueOnly mode at the time.

This happened last night, and I replicated it today.  I'll send the show file.

Enjoy,

BrentS



[edited by: BSmith at 10:27 AM (GMT -6) on Fri, Feb 08 2008]
Parents

  • No need to send another file Brent, I just loaded your show and can reproduce the problem using v1.3.0, but this is fixed in 1.3.1, which is coming out very soon.

    Thanks for reporting this. As a workaround, you should be able able to use copyTo instead of moveTo, and then just delete the cue that you copied from.

Reply

  • No need to send another file Brent, I just loaded your show and can reproduce the problem using v1.3.0, but this is fixed in 1.3.1, which is coming out very soon.

    Thanks for reporting this. As a workaround, you should be able able to use copyTo instead of moveTo, and then just delete the cue that you copied from.

Children
Related

www.etcconnect.com