Programing Movers & LEDS on Fader Wings

Hey all,

I am having some trouble programming some simple LED fixtures as well as some Mac 250 Entour's on the ETC Ion console. I am wanting to program different color and movement looks to sbumasters and then just run them off the fader wing.

When doing so I can get the looks I want but when I use the fader to control the look it must fade through other colors/positions to get to the final result. The same occurs when fading out of the fader. Is there a way to program intensity parameters, color parameters, position, etc separately to where this wouldn't happen much like on a Road Hog console. I am new to programming on the ETC ION console and am having trouble.

Thanks for the help.

Parents

sk8rs_dad over 11 years ago

Change your subs from Proportional to Intensity Master. (Sub x {Fader}[Enter]). The {Fader} softkey will toggle between the 2 values.

Hitting the bump button or nudging the fader will set all the NPs to their stored value and the fader will control the intensity.
Cancel
Vote Up 0 Vote Down

Sign in to reply

Cancel
Alyle over 11 years ago in reply to sk8rs_dad

Okay perfect. Thank you. That fixed my first problem. Now when I try to use the faders to bring up the two separate lines of LEDs (odds and evens) it pops between colors. If I try to do all red one turns green. All green works. If I try to do all blue one pops to green. Any ideas?

Thanks!
Cancel
Vote Up 0 Vote Down

Sign in to reply

Cancel

Reply

Alyle over 11 years ago in reply to sk8rs_dad

Okay perfect. Thank you. That fixed my first problem. Now when I try to use the faders to bring up the two separate lines of LEDs (odds and evens) it pops between colors. If I try to do all red one turns green. All green works. If I try to do all blue one pops to green. Any ideas?

Thanks!
Cancel
Vote Up 0 Vote Down

Sign in to reply

Cancel

Children

No Data