• Date
    Alyle
  • Date
  • Replies 7 replies
  • Subscribers 187 subscribers
  • Views 8558 views
  • Users 0 members are here

Programing Movers & LEDS on Fader Wings

Hey all,

I am having some trouble programming some simple LED fixtures as well as some Mac 250 Entour's on the ETC Ion console. I am wanting to program different color and movement looks to sbumasters and then just run them off the fader wing. 

When doing so I can get the looks I want but when I use the fader to control the look it must fade through other colors/positions to get to the final result. The same occurs when fading out of the fader. Is there a way to program intensity parameters, color parameters, position, etc separately to where this wouldn't happen much like on a Road Hog console. I am new to programming on the ETC ION console and am having trouble. 

Thanks for the help. 

Parents
  • Here's what I've done:

    * Put the gear in the color you want. (for me I also created Group 1 for this exercise)

    *** [Group] 1 [Color] [Record] [Sub] nn [Label] xxxxxxx [Enter] (then assigned it to a fader)

    I've also done the same for an intensity fader with all LED colors at 100. When that Fader is up... then all the color faders work as programmed.

    My two cents of this!
Reply
  • Here's what I've done:

    * Put the gear in the color you want. (for me I also created Group 1 for this exercise)

    *** [Group] 1 [Color] [Record] [Sub] nn [Label] xxxxxxx [Enter] (then assigned it to a fader)

    I've also done the same for an intensity fader with all LED colors at 100. When that Fader is up... then all the color faders work as programmed.

    My two cents of this!
Children
No Data
Related

www.etcconnect.com