• Date
    jcughan
  • Date
  • Replies 12 replies
  • Subscribers 184 subscribers
  • Views 8125 views
  • Users 0 members are here

Hue/Sat on Subs

I've made 3 different subs (one for intensity, one for hue, one for saturation) that control a group of Selador D60's.  I setup the subs right, and everything works great until I save the show file, and open it back up.  Then for some reason the Sub controlling Hue also controls Saturation, and the sub controlling Saturation Also Controls Hue.  I can then Make Null the Hue or Sat to correct it, but anytime I open the file back up it does the same thing again.

 

Anyone know why this is happening?

Parents

  • I reported the issue a couple of years ago. The only workaround I found was to null out the unwanted parameters after loading.  It can be done with a macro. Maybe with a second report it will get bumped up the list. 

  • in reply to sk8rs_dad

    sk7rs_dad, I'm not seeing this issue in 2.1.  Since you are beta testing, can you try this and tell me if you see it.  I don't recall this issue - there was no SCR  in the 2.1 builds that addresses it.

    Thanks!

    a

     



    [edited by: Anne Valentino at 8:37 AM (GMT -6) on Wed, Oct 16 2013]
  • in reply to Anne Valentino

    I am still seeing the issue. With build 67 I did this:

    • Group 201 Full Full
    • Group 201 Hue 359 Enter
    • Group 201 Saturation Full Enter
    • Group 201 Hue Record Sub 12 Enter
    • Group 201 Saturation Record Sub 13 Enter
    • Group 201 Intensity Record Sub 14 Enter

    In blind,

    • Sub 12 shows values for both Hue (359) and Saturation (0)
    • Sub 13 shows values for both Hue (0) and Saturation (100)
    • Sub 14 show values for Intensity (100)

     I then nulled out the unwanted zeroes on Sub 12 and 13 to have values only for Hue and Saturation, respectively using @ Enter in Blind.

    Saved and reloaded the show file. The unwanted zeroes are back for Sub 12 and 13.

    P.S. I went hunting for my original report and couldn't find it either. It might have been by e-mail or tacked onto another marginally related thread by somebody else.

     

  • in reply to sk8rs_dad

    Hmmm... still not seeing this.  I tried this both saving to the showfile and only making the change in persistent storage.  Can you email me the showfile you are seeing this on?  And I can assume group 201 has the channels involved.  Am wondering if it is fixture related in some way.

    Thanks much!

    a

     

  • in reply to Anne Valentino

    I get the same behaviour using Selador Desires and Blizzard Pucks. Group 201 is 16 Vivids in HSIC+Str mode.

  • in reply to sk8rs_dad

    I see this on the Vivids in HSIC mode (it appears to be related to devices in modes with only HS and no native controls).  I patched a couple of different versions of Pucks... but they all have native mixing.  Can you tell me exactly which version of Blizzard fixture?  (Just to make sure it IS only devices with only HS settings?)

    Thanks!

    a

     

Reply
  • in reply to sk8rs_dad

    I see this on the Vivids in HSIC mode (it appears to be related to devices in modes with only HS and no native controls).  I patched a couple of different versions of Pucks... but they all have native mixing.  Can you tell me exactly which version of Blizzard fixture?  (Just to make sure it IS only devices with only HS settings?)

    Thanks!

    a

     

Children
Related

www.etcconnect.com