• Date
    JustinM
  • Date
  • Replies 2 replies
  • Subscribers 187 subscribers
  • Views 1938 views
  • Users 0 members are here

Sneak bug?

Hi,

 

In a cuestack I started an effect over a channel (channel 17) (E10)

this effect is a simple 2 step chase of 1 channel, 1=35%, 2=50%, and jumps every second.

Now I change the output of this channel 17 to above 50%, and realised it was the wrong channel, so I clear and press Sneak, Enter. 

shouldn't the effect being sneaked back into place then? It remains at the lowest (35%) level now?

 

Justin M

 

Parents

  • Hi Justin,

    This is a known issue -- the workaround is to assert the cue in question, and the effect will restore. The SCR (software change request) number for this is SCR 25215.

    On Ion, you would tap "Fader Controls", and the press and hold {Assert} (a softkey) and tap the load button for the cue list in question.

    Thanks!

    Hans

Reply

  • Hi Justin,

    This is a known issue -- the workaround is to assert the cue in question, and the effect will restore. The SCR (software change request) number for this is SCR 25215.

    On Ion, you would tap "Fader Controls", and the press and hold {Assert} (a softkey) and tap the load button for the cue list in question.

    Thanks!

    Hans

Children
Related

www.etcconnect.com