• State Not Answered
  • Date
    ken_cohen
  • Date
  • Replies 2 replies
  • Subscribers 184 subscribers
  • Views 2002 views
  • Users 0 members are here

Eos Gio Question

Every time I record a cue using record or record only, and I go back and play that cue, channels 85-94 are part of the cue on 100%. I am wondering if this is because of the way they are patched. I am wondering if there is a way to stop this from happening from the beginning or if you can't figure it out, if there is a way to delete those channels from the cue.

Another thing that might help is that whenever I start the console up, the same channels go to 100%.

Any advice you have would be helpful.

Thank you

Parents
  • 0

    do you have the channels up in a submaster? If they are up in a sub and the sub is not exclusive they will record into a cue.  The other thing to remember is that the Eos is a tracking console so unless you tell the channels to got out at some point they will track through till you give them another command.

    you can use the about screen to see where they are getting there level from. if it is magenta then it is a track value and you need to take it out in the first cue you do not want it in and update the value to track.

Reply
  • 0

    do you have the channels up in a submaster? If they are up in a sub and the sub is not exclusive they will record into a cue.  The other thing to remember is that the Eos is a tracking console so unless you tell the channels to got out at some point they will track through till you give them another command.

    you can use the about screen to see where they are getting there level from. if it is magenta then it is a track value and you need to take it out in the first cue you do not want it in and update the value to track.

Children
Related

www.etcconnect.com