effects

Not at the desk so this is from memory

On the MAC's, assuming a basic profile in the Ion patch, it's in the Image section, the 2nd encoder wheel selects the image, you can press down on the encoder and hit Next/Last to select the gobo's that can rotate.

Once you've selected a rotational gobo, the 1st encoder wheel should say "Gobo Ind/Spd'.  You can spin the encoder wheel to get movement, I think -100 to 100 is one direction, 0 to 100 the other, or something like that. If you don't see "Gobo Ind/Spd" on encoder 1, press down on the 2nd encoder and then press the Mode softkey to get the 1st encoder into the correct selection.  

Not at the desk so this is from memory

On the MAC's, assuming a basic profile in the Ion patch, it's in the Image section, the 2nd encoder wheel selects the image, you can press down on the encoder and hit Next/Last to select the gobo's that can rotate.

Once you've selected a rotational gobo, the 1st encoder wheel should say "Gobo Ind/Spd'.  You can spin the encoder wheel to get movement, I think -100 to 100 is one direction, 0 to 100 the other, or something like that. If you don't see "Gobo Ind/Spd" on encoder 1, press down on the 2nd encoder and then press the Mode softkey to get the 1st encoder into the correct selection.