Indu Switchpack

Morning

If I'm understanding your question correctly all you want to do is patch a non dim (on at 50%)? but patch 6 parts all as non dims. Each part would be patched to each DMX address in order such as part1 @ 201, part2 @ 202 up to Part 6 @ 206.

I hope that makes sense and helps.

Stacy

Morning

If I'm understanding your question correctly all you want to do is patch a non dim (on at 50%)? but patch 6 parts all as non dims. Each part would be patched to each DMX address in order such as part1 @ 201, part2 @ 202 up to Part 6 @ 206.

I hope that makes sense and helps.

Stacy

Hej,

thanks for your replies. I was far far to inconcrete and drunk ;-) ! I'm sorry for that.

So, what I wanted to ask is, how I can create a device with 6 parameters without a primary intensity parameter. A example, from what I built is in the show attached ( Channel 230). My Problem is that there is a 7th parameter called "Intens" inserted by the console automaticly. Is there a way to create a fixture without automatic Intensity Channel?

Thanks a lot,

Dominik

no file attached. try again

yes I know, sorry aggain for that I don't get it up at the moment. I'm working on it. nevertheless thanks for your time!

Deleted!

Now it seems, that the lower link works. Please excuse the complications. Lower should be found the showfile. Please remind the Channel was 230. Thanks a lot for your help and patience, Dominik

LINK

Sorry--Seems the file is invalid. It is a .rar extension when downloaded and should be a .esf

You can email the file direct to me

josh dot selander at etcconnect dot com