ArtNet control of Panasonic projector

Hey all-

 

This is kind of a long shot, but I am wondering if anyone has had any success in controlling the shutter function of a DZ21k projector via ArtNet.  It seems as though I have all of the settings inside the projector correct, and I have patched the address to match the address of the projector (and selected ArtNet as the output).  I just can't seem to get it to work!  Anybody have any thoughts??

 

Parents
  • the universe numbering is indeed off by one.  in Eos I've set it to Universe two but I've had to tell the projector to listen on Universe 3.  i used Wireshark to monitor the packets my Ion was sending and saw that the DMX universe was coming across on 3.  I was able to park the enable/disable channel so that its always enabled. In shell the Artnet is "start 2" so i think its network 0 and subnet 2; which seems to match what Richard is saying.

    thanks both!

Reply
  • the universe numbering is indeed off by one.  in Eos I've set it to Universe two but I've had to tell the projector to listen on Universe 3.  i used Wireshark to monitor the packets my Ion was sending and saw that the DMX universe was coming across on 3.  I was able to park the enable/disable channel so that its always enabled. In shell the Artnet is "start 2" so i think its network 0 and subnet 2; which seems to match what Richard is saying.

    thanks both!

Children
No Data
Related