• State Not Answered
  • Date
    Meike
  • Date
  • Replies 1 reply
  • Subscribers 184 subscribers
  • Views 1343 views
  • Users 0 members are here

SL Bar 520

Hello all, 

 I am trying to control a SL Bar as six different channels.

I've tried a combination of a couple of profiles and settings on the fixture- both 6 group and 1 group. Anything I try makes the instrument behave erratically.

Anyone have an idea? Which profile should I be using and what settings should I use on the instrument?

Thank you for any help. 

Parents
  • 0
    Disclaimer: I've never worked with the fixture. From looking at the profile, I think you want to set the fixture to RGBW 6 Group. And then you go and edit the Eos fixture profile: delete all red green blue white parameters except the first set. That's your first channel. Channels 2 through 6 use Generic LED RGBW 8b. Regarding start addresses in patch: if your channel 1 has address 1, then 2 through 6 will have 11, 15, 19, 23, 27.
Reply
  • 0
    Disclaimer: I've never worked with the fixture. From looking at the profile, I think you want to set the fixture to RGBW 6 Group. And then you go and edit the Eos fixture profile: delete all red green blue white parameters except the first set. That's your first channel. Channels 2 through 6 use Generic LED RGBW 8b. Regarding start addresses in patch: if your channel 1 has address 1, then 2 through 6 will have 11, 15, 19, 23, 27.
Children
No Data
Related

www.etcconnect.com