Bad Error on editing new fixture in patch

We are able to reproduce the defect here too now. I'll post more, when we know more. What fixture are you trying to create a custom perosnality for? And are you are using Eos v1.3.0 or 1.3.1?

 If you need that showfile, and you didn't have any other custom created fixtures that you need, click the fixtures button when you load the show file, and it will load the file without the custom fixture that is causing the problem.

hello!

I have sent the logfiles, in case it still may help.

I wanted to create a 4kW HMI movinglight with shutter and scroller (Lighting Technology), and I found out that I can avoid the problem by putting all other parameters correctly and afterwards inserting the scroller so that the hue and saturation are put in last.

Thats what it looks like:

 1/2  Intensity 16 bit

   3  Scroller

 4/5  Pan 16bit

 6/7  Tilt 16bit  

   8   Movespeed

   9   Zoom

        (Hue)

        (Saturation)

We are using v1.3.1

The showfile is not important, it was just for practicing, so we do not miss anything.

What I found in trying what may be wrong was, that the console does this: when I say 'save as' and enter a new showname and press enter, it has put me that filename into the list, but seems to not save the show. So then its clear to me, why I couldn´t load my show, because only the name was saved, but nothing behind it.

This seems strange to me, if I say 'save as', I have to save twice, first the new name and then the show into the new-named folder, to really save the show under a new name?

I think its my mistake, where did i go wrong?

Thanks for support,

mary

hello!

I have sent the logfiles, in case it still may help.

I wanted to create a 4kW HMI movinglight with shutter and scroller (Lighting Technology), and I found out that I can avoid the problem by putting all other parameters correctly and afterwards inserting the scroller so that the hue and saturation are put in last.

Thats what it looks like:

 1/2  Intensity 16 bit

   3  Scroller

 4/5  Pan 16bit

 6/7  Tilt 16bit  

   8   Movespeed

   9   Zoom

        (Hue)

        (Saturation)

We are using v1.3.1

The showfile is not important, it was just for practicing, so we do not miss anything.

What I found in trying what may be wrong was, that the console does this: when I say 'save as' and enter a new showname and press enter, it has put me that filename into the list, but seems to not save the show. So then its clear to me, why I couldn´t load my show, because only the name was saved, but nothing behind it.

This seems strange to me, if I say 'save as', I have to save twice, first the new name and then the show into the new-named folder, to really save the show under a new name?

I think its my mistake, where did i go wrong?

Thanks for support,

mary

Thanks, if you add the scroller parameter last, you should be fine.

[Save as] should save the file as well as name it. I tried to reproduce this probelem here and couldn't. Whenevr I choose [save as] it saves all my data. If you see it again, let us know and we'll investiaget further.