Request For Fixture Library - Vello Lighting Noble Gene280

Your request has been submitted--Will let you know when the library has been created.

Thank you for this profile in the most recent library update. One issue though.

In the profile there is a virtual(?) parameter for the color wheel mode. It sets between the snap, spin, and sound activated modes. I'd like to add a Continuous mode to this, but the fixture editor won't let me add another range value to this parameter.

Am I doing something wrong or is that something ETC needs to adjust?

Thanks

Jeff

Hello, Jeff:

You will not be able to edit any virtual parameters in our fixture profiles, nor delete them.  I am sorry for this.

I am submitting information to see if we can have the button added or not.

In the meantime, you can still access the appropriate range using ML controls or the encoder wheels on a console in order to get this wheel to move continuously.

Thank you,

Thanks Sasha.

I've seen other fixtures, that have a virtual color select mode parameter, that had a Continuous mode button, so it should be doable.

Using the encoder wheel doesn't work because it 'snaps' from frame to frame. I haven't tried using the ML controls, but that'll be my next step.

Thanks,

Jeff

Press shift while turning the encoder...

Press shift while turning the encoder...

Thanks.

Another question regarding this profile.

When they created it, they made a color wheel that put the color blocks on each frame button in the encoder. For some reason, it's not appearing on the encoder screen or the ML controls. All I'm getting are the step names. I've worked with the color wheels before on other fixture and have even created my own, I'm just not able to figure out why it isn't showing up. The same thing is happening with the gobo wheels I'm trying to create for this fixture.

Any ideas?

Jeff