doubts Nomad Eos

Dudas Nomad
Excuse use google traslate
Eos Nomad my disposal 2,2,0,2,2,0,9,0,96 version (Windows 8.1) and Win Fader. Intent overtake show offline.

Tracking mode
Cue 1 channels 1 thru 5 at 50%
Cue 2 channels 1 thru 5 at 0% and 6 + 7 at 75%
Cue 3 Blackout
Modify Cue 1 channels 1 thru 5 at 50% and add channel 11 FF
Enter Update
Block 3, but appears Cue channel 11 FF

What?

Other questions:
is operative ] (right bracket) (Fader Pages) and Cue Go To Zero and Release
No I get them work.

In the win as different submaster fader loaded into different pages. Mapping the submasters 2x10 and office. example; pag1 sub1 1FF pag3 sub21 channel 50ff. Submaster same but on different pages managing different things is not possible?

Sorry for so many questions, but all these questions give me a lot of insecurity.

Parents

0 saranow over 10 years ago

The fader pages button should work. For Go To Gue Zero and Release these apply to playback faders, and so don't do much on their own.

Have you tried using the virtual keyboard to execute these commands at all?
Cancel
Vote Up 0 Vote Down

Sign in to reply

Verify Answer

Cancel
0 Jkar Gorostiza over 10 years ago in reply to saranow

Thank You. Yes.Con the virtual keyboard fader page is ok. Although a second screen is required only for him. It would also enable better and faster (bracket)] 3 = page 3 .....] 10 = page 10 etc. Thanks I found it very helpful.
Cancel
Vote Up 0 Vote Down

Sign in to reply

Verify Answer

Cancel
0 ueliriegg over 10 years ago in reply to Jkar Gorostiza

did you try Ctrl+K? this should show you the Virtual Keyboard as overlay and you can work with one screen
Cancel
Vote Up 0 Vote Down

Sign in to reply

Verify Answer

Cancel
0 Jkar Gorostiza over 10 years ago in reply to ueliriegg

Sincere thanks for the help. (Ctrl + K) if they knew. I have a 23-inch touch screen and virtual keyboard it occupies 50% of it. I understand it that way. The question is: in touch fader page (K-virtuality), now in the win fader all the LEDs are green, one blink indicating the number of current page. example; Now I press the button on page 8. Then my disposal sub 20 on page 5. How do I return to page 1? Again open (Ctrl + k) virtuality keyboard, press fader page to disable the above command, press again to turn fader page again choosing fader pages in the win .... Is not there a simpler way? Thanks for your patience.
Cancel
Vote Up 0 Vote Down

Sign in to reply

Verify Answer

Cancel

Reply

0 Jkar Gorostiza over 10 years ago in reply to ueliriegg

Sincere thanks for the help. (Ctrl + K) if they knew. I have a 23-inch touch screen and virtual keyboard it occupies 50% of it. I understand it that way. The question is: in touch fader page (K-virtuality), now in the win fader all the LEDs are green, one blink indicating the number of current page. example; Now I press the button on page 8. Then my disposal sub 20 on page 5. How do I return to page 1? Again open (Ctrl + k) virtuality keyboard, press fader page to disable the above command, press again to turn fader page again choosing fader pages in the win .... Is not there a simpler way? Thanks for your patience.
Cancel
Vote Up 0 Vote Down

Sign in to reply

Verify Answer

Cancel

Children

No Data