Cuelists on Faders

to get a cuelist fader to control intensity, you want to set the fader to Intensity Master. you can do that either in the cuelist display (Cue Cue) or from the command line: [Cue] [1] [/] {Fader} [Enter]. Cue 1 / means cuelist 1. Fader is a softkey. when you press it once it will write Intensity Master to your command line (Cue 1 / Intensity Master Enter).
does that help?

Hi! Thanks a lot, exactly what I was looking for. So I take the opportunity to add a follow-up question: Having a cuelist loaded on a fader, I got a Go and a Back button. Go is using the cue timing, Back seems to use the default timing, Is it possible to set Back to cue timing also?

back always takes its time from Setup > Desk > Manual Control > Back Time. with Shift+Go and Shift+Back you get 0 seconds (or whatever you have set in Setup > Desk > Manual Control > Timing Disable. to go back and use cue timing you need to use Goto Cue Last Time Enter. (Goto Cue takes also a setup time, but Goto Cue Time Enter will take the cue time)

Again, thanks a lot!
regards, Tommi

Again, thanks a lot!
regards, Tommi

How do you release the cue list from the fader? How do you go to cue out on that list without taking out other cuelists?

You can either Release + Load on that fader to release the contents of that playback to their background levels, or Shift + Load to clear the playback (or submaster) assignment from that fader.

Release + Load also resets the list to the top of the Que -- where Off + Load turns the content of the list off, but leaves the pending cue intact. Go to Cue n / Out Enter will "out" just the specified list.
Hope that helps.
Anne