Any thoughts: had two same cues in a row. In dress the director made a conventional fixture only change to the first of the two cues which fixed the scene but made the second cue unnecessary. Instead of deleting that unnecessary cue in tracking mode I made the identical change to the second unwanted cue so all i had to do was hit that cue when the first one was done, no visible change would be seen and we would be back on track again. (I don't like deleting cues in tracking mode even when they are Qonly deletions. Just me.)
Anyway to help make it even easier I made that second identical cue auto follow in 0 seconds. Both cues were originally at 3 seconds. I changed the second cue to 0. When i run the cue list and get to the first of the two same cues it runs in the 3 second timing but then the second cue runs around 14 seconds. The only other fixtures running in the cues are 8 led wash movers. I'm pretty sure (not at the venue right now) that the dur in each cue shows 3 and 0 seconds.
