Ion midi trigger by Qlab(msc)

Hello!!

I want to trigger an ion using qlab.
No matter explore the various forums,  I do not know what the problem is.
I'm being lost right now ...

Even if you are busy, please explore my youtube.
The first set of qlab.
https://youtu.be/NLvJkcCKH_8


The second set of ION.
https://youtu.be/FBi3OCQ10JI

And it is used as a MIDI interface "" ESI M4U "".

I hope a lot of help.
Thank you all!

ps. I wrote with the help of Google Translator.
Please understand that do not speak English well.

Parents
  • 0

    Can you try the following:

    - Set the MSC Receive ID to 1?

    - Exit to Settings -> Local I/O and confirm the ACN MIDI Rx ID is 1?

    - Open the diagnostics tab ([Tab] + 99) or go to Setup -> Diagnostics? This will show incoming MIDI

    Keep in mind the MSC Receive ID is the Device ID, while the ACN MIDI RX/TX IDs are specifically for telling the console which show control gateway or local port(s) to listen to.

    Thanks! The videos were super helpful.

    Hans

Reply
  • 0

    Can you try the following:

    - Set the MSC Receive ID to 1?

    - Exit to Settings -> Local I/O and confirm the ACN MIDI Rx ID is 1?

    - Open the diagnostics tab ([Tab] + 99) or go to Setup -> Diagnostics? This will show incoming MIDI

    Keep in mind the MSC Receive ID is the Device ID, while the ACN MIDI RX/TX IDs are specifically for telling the console which show control gateway or local port(s) to listen to.

    Thanks! The videos were super helpful.

    Hans

Children
Related

www.etcconnect.com