If I have an EOS console with an attached 2x10 fader wing, and I press the "Fader Page" button to change the fader wing page, after I change the page and release the button, the fader page on the console faders has advanced as well.
For instance -
on the wing I am on page 1 and on the console I am on page 3.
If I press "Fader Page" and press the "Page 2" bump button on the wing, the wing then switches to page two. However, my console is now set to page 4.
It makes sense that this would happen, because if I don't have a wing, I have to be able to change the fader page on the console, but is there a way for the desk to recognize the keystroke of pressing the fader wing bump button as the completion of the command?
Also - There are some coordination issues with the submaster levels between a fader wing page and a console page. When I am controlling sub one on both pages, the faders on the desk will move to the position of the submaster set by the fader wing only once you have changed to a different page and then come back. I am not saying that the fader on the desk should move at the same time as the submaster on the fader wing, but is there a plan on how to deal with this discrepancy between physical faders controlling the same submaster?
[edited by: JeffMabray at 2:49 PM (GMT -6) on Tue, May 20 2008]
