How can I show the present and next cue numbers and times on a magic sheet?

not in classic Magic Sheet way. but i'm pretty sure you can display an OSC field that get's populated by the console

add two empty fields. take the empty button right of the macro button. set the both to target=Command. in of the button's command field put /eos/out/active/cue/text , in the other one you put /eos/out/pending/cue/text
you don't even need OSC activated in Show Control Setup. not sure if in a master-client setup you would need to put ports and a tx ip in setup, but somehow it will work

add two empty fields. take the empty button right of the macro button. set the both to target=Command. in of the button's command field put /eos/out/active/cue/text , in the other one you put /eos/out/pending/cue/text
you don't even need OSC activated in Show Control Setup. not sure if in a master-client setup you would need to put ports and a tx ip in setup, but somehow it will work

Thank you! That gave us a good start and will get us through tech. I would love to tweak this and make it part of each of our Magic Sheets. Am I right that the commands listed are "OSC" command strings? Is there a glossary for these, maybe a web site?

it's OSC but the field you defined in your magic sheet is an OSC address. the console then sends strings to this address.
there is a list in the Eos Family Show Control User Guide which can be downloaded from the Eos Family product pages.

Thank you again!

Download the Eos OSC Keys pdf from here: https://github.com/ElectronicTheatreControlsLabs/OSCLayouts

And also check out the OSC SEction in the Eos Show User Control Guide here: http://www.etcconnect.com/Products/Consoles/Eos-Family/Eos-Ti/Software.aspx