• State Not Answered
  • Date
    da960572
  • Date
  • Replies 1 reply
  • Subscribers 185 subscribers
  • Views 1598 views
  • Users 0 members are here

How to separate one cuelist into two cuelist?

Hi,

We using ION on this show.

At first, there are mixing manual submaster and one Cuelist during the show.   

After mass working, We separate one cuelist into two cuelist.

Ch1 Thru 30 in Cuelist one， Ch31 Thru 80 in Cuelist two. We want to playback any cuelist will never active the other cuelist parameter. 

But we find there are always some dirty NP parameter between each other. Make mass. 

How can remove Ch31 Thru 80 all Parameter in cuelist one?

And is it possible to create two different playbak view on screen?

Thanks

Vincent.

  • 0

    To make 2 cuelists.

    Cue 1/ Copy To Cue 2/ Enter.

    To clear the cuelists of parameters.

    In this example I'm going to use cue 1 as the first cue in the list if you have a lower number use that.

    Go to Blind

    Cue 1 Thru Enter (this will select all your cues).

    Ch 31 Thru 30 @ Enter (this will clear all the parameters from list 1). Do the same for list 2 using list 1 channel numbers.

    To make 2 playbacks on screen select the PSD tab.

    Tab + 2 or click on the PSD Tab.

    Use the Format key to toggle through the PSD (you normally only need to press it once if you are starting in the default state) so you see a grey line. Then use a mouse to drag this line up and you'll see 2 cuelists.

    You'll then to lock each cuelist to the different lists using the padlock.

    The other option which I use it to split this display into 2 (if using software 2.2 onwards) and placing a cuelist in the 2 halves.

Related

www.etcconnect.com