• Date
    grahamparker
  • Date
  • Replies 2 replies
  • Subscribers 183 subscribers
  • Views 3430 views
  • Users 0 members are here

V1.4 Flexi displays

In version 1.4 when 'Group Chans By 5' is enabled in setup all is well on the display until you go into any of the Flexi views. At this point all tombstones are forced over to the left of the display with no gaps between the groups of 5.

This goes for Ion and the OLE as well, haven't upgraded the EOS to 1.4 yet, although I didn't notice it yesterday when playing with 1.4 at ETC London...

 

Bug? or me being stupid??? 

Parents

  • Hi Graham,

    I have just checked my EOS and I have the same thing happening so I don't think its you. Also when cycling through the flexi displays they seem to be very slow in changing up to 8/9 secs

  • in reply to malcg

    Hi guys.  Both of these are known issues.  (You always reach a point with a new release where you just have to let it go, even though you know there are a handful of outstanding issues that need to be addressed.  If you don't, you can't ever get the code out the door). 

     Both of these are known issues.  The speed issue will be addressed in a couple of weeks (so, again, "watch this space.') The alignment problem will either be in that release, or the one following shortly in July.

    Please stand by!  And thanks,

    a 

Reply
  • in reply to malcg

    Hi guys.  Both of these are known issues.  (You always reach a point with a new release where you just have to let it go, even though you know there are a handful of outstanding issues that need to be addressed.  If you don't, you can't ever get the code out the door). 

     Both of these are known issues.  The speed issue will be addressed in a couple of weeks (so, again, "watch this space.') The alignment problem will either be in that release, or the one following shortly in July.

    Please stand by!  And thanks,

    a 

Children
No Data
Related

www.etcconnect.com