I have the ETC Element and would like to hook it up to my computer where I am running Pro Presenter and would like to be able to trigger cues via Pro Presenter. Any help would be great?

If you are running Pro Presenter on a Mac, it is possible to trigger AppleScripts on that Mac from an Element via OSC.  With a little digging around, you can send keystroke commands to any application.

That link talks about using Qlab, but the process is the same from an Element.  Give it a look and see if that would do what you want.  We can help you set it up.

The Eos Family consoles don't output MIDI over Ethernet, but they do output Artnet.  There is a ProPresenter fixture profile already loaded on your desk (under RenewedVision in Patch).  Take a look there.

Yes, you would need to connect both the Element and the iMac on the same ethernet network and configure their IP addresses so they're able to talk to each other.  Once you've got that set up, you'd go into Patch on your Element, pick an empty channel, and assign it the fixture type for Pro Presenter.

I've never used Pro Presenter, but I will say that controlling any media server on an Element is not for the faint of heart.  Perhaps others who have used Pro Presenter will chime in with advice.