Moving LTP faders

Can you provide a little more information? What parameter are you seeing this with? Is it possible for you to email me a show file? (anne.valentino@etcconnect.com) It would be great if you could identify the two subs in question, the channel and parameter you are seeing this with.
Thanks much!
anne

I'm seeing this behavior on 2 different Ion consoles with different show files. One is XP, one is Win7. I'll send you a culprit show file tomorrow when I have my laptop on hand.

But it doesn't matter which sub. If Sub 1 is at >0%, when I take Sub 1 Move To Sub 15, all LTP parameters owned by Sub 1 go home. Not back to their background cue, they go to home.

If Sub 1 is HTP, all NIP's go home. If the sub is LTP, all parameters go home.

I'm seeing this behavior on 2 different Ion consoles with different show files. One is XP, one is Win7. I'll send you a culprit show file tomorrow when I have my laptop on hand.

But it doesn't matter which sub. If Sub 1 is at >0%, when I take Sub 1 Move To Sub 15, all LTP parameters owned by Sub 1 go home. Not back to their background cue, they go to home.

If Sub 1 is HTP, all NIP's go home. If the sub is LTP, all parameters go home.

So you have sub x defined and at full. And you move another active sub to that location and are seeing the values home. Are you sure that your source sub is the current owner?

Sub X is defined and at Full. I move Sub X to an empty sub # and I see its values home.

Ah, I found it.
Thanks,
anne