Hello,
I'm running a Rogue R2 wash in 33 channel mode and found a bug in the profile (Eos Family Fixture Library Version 2.3.3.9.0.39). As loaded in the profile channels 8-27 are all labeled red, green, blue, white, red, green, blue, white, red, green, blue, white, red, green, blue, white, red, green, blue, white. This makes zone control impossible.
I went though and edited the channels according to the documentation, channels 8 - 27 RGBW, 1-5 (8- red 1; 9 - green 1; 10 - blue 1; 11 - white 1; 12 - red 2; 13 - green 2; 14 - blue 2; 15 - white 2; 16- red 3; 17 - green 3; 18 - blue 3; 19 - white 3; 20- red 4; 21 - green 4; 22 - blue 4; 23 - white 4; 24 - red 5; 25 - green 5; 26 - blue 5; 27 - white 5). There's zone control now but that led me to the next quirk.
Ion running v2.3.3
The first encoder color page was fine, RGBW.
Page 2: blank, blank, blank, Red 2
Page 3: Green 2, Blue 2, White 2, White 3
Page 4: White 4, White 5, blank, blank
Page 5: Hue, Saturation, Color Mix, blank
Page 6: Red 3, blank, blank, Green 3
Page 7: Blue 3, Red 5, Green 5, Blue 5
Page 8: Red 4, Green 4, Blue 4, blank
Using flexi encoder mode the some of blanks were eliminated and I was able to get down to 6 pages
Page 1 Flexi: Red, Green, Blue, White
Page 2 Flexi: Red 2, Green 2, Blue 2, White 2 (Yay!)
Page 3 Flexi: White 3, White 4, White 5, blank
Page 4 Flexi: Hue, Saturation, Color Mix, Red 3
Page 5 Flexi: Green 3, Blue 3, Red 5, Green 5
Page 6 Flexi: Blue 5, Red 4, Green 4, Blue 4
The encoders not being grouped by zone and without being in order makes programming difficult. Is there a way to re-map parameters to the encoders?
Thanks for your help
