So I have a sub that has a hazer with 4 parameters recorded into it. Some of those values were recorded into my master cuelist at zero values. If I have my sub set at LTP, Proportional, Exclusive, Independent, I would expect that when I run a cue on that master cuelist or assert it that nothing would happen to the control of that sub. Not so much it seems. How can I achieve this?
Jason, it looks like adding the LTP attribute breaks independent. So, can you get away right now with placing it in HTP mode? Then all should be OK. This will be fixed in 1.4.2 (July release).
It is worth noting here (perhaps) that manual control overrides independent and exclusive status. (Completely not related, but while I was thinking about it!)
Anne
[edited by: Anne Valentino at 8:53 AM (GMT -6) on Mon, Jun 16 2008]
Jason, it looks like adding the LTP attribute breaks independent. So, can you get away right now with placing it in HTP mode? Then all should be OK. This will be fixed in 1.4.2 (July release).
It is worth noting here (perhaps) that manual control overrides independent and exclusive status. (Completely not related, but while I was thinking about it!)
Anne
[edited by: Anne Valentino at 8:53 AM (GMT -6) on Mon, Jun 16 2008]
