Nomad (EOS) OSC syntax for submaster intensity

Question

Hello, 
 I am currently trying to control a submaster's intensity via OSC on Mac OSX. I have OSC setup correctly on both machines, and I can fire the following OSC commands from either QLab or Isadora: 
 /eos/sub/1/full 
 /eos/sub/1/level 
 /eos/sub/1/out 
 What I would like to do is send a specific intensity command (and eventually a series of intensities to replicate a sub fader), but the syntax suggested in the show control guide doesn't seem to work. 
 Any suggestions? 
 Thanks, 
 Craig

Druuka · Accepted Answer

The level needs to be a float between 0 and 1. If you want to set the sub to 50% then you need to transmit /eos/sub/1 0.50 as a float. The address is just /eos/sub/1 and the value is the 0.50 
If you have TouchOSC the basic fader works properly. It is an object that transmits a value between 0 and 1 depending on the fader position.